A whole range of rail fixings and attachments ar available to allow HiGlide™ installation in many types of location, regardless of the shape and size of the ceiling and walls.

Brackets.
The Universal Fixing Bracket is a full set of brackets, rail clamps & fittings which allow rails to be attached to a flat or vertical surface either parallel or at right angles to the rail. A Short Fixing Bracket is available for fixing rails to a flat ceiling.
The Rail Wall Mounting Bracket allows a single rail to be mounted from a wall. The Triple Rail Wall Mounting Bracket allows three rails to be simulateously connected for mounting perimeter curtains or cycloramas.

Clamps.
The Scaffold Clamp allows rails to be mounted parallel to a standard scaffold pole.
The Back to Back Clamp is used for mounting rails at 90° to the fixing bracket or to each other.
The Adjustable Girder Clamp attached is for fixing rails to girders (RSJ or I Beams) with widths from 2½" to 8".
The Fixed Rail Clamp with Spigot is used to attach items to the rail system that are not required to move.

Drop Ceiling Supports.
The fixed length Drop Ceiling Supports allow the rails to be fixed at the correct height for effective operation. (10'-11' is the recommended height for a HiGlide™ System.)

Adjustable Drop Ceiling Supports.
The Adjustable Drop Ceiling Supports are designed to be used when a ceiling height is uneven. Drop supports are recommended when mounting the HiGlide™ through fasle or suspended ceilings which would not be able to support sufficient weight.

Images of all HiGlide accessories and more information is available in the Bowens 'Imaging Support' brochure which can be downloaded from this page.